Today we’re installing an Aeroflow oil feed line bracket to suit Barra turbo engines – except I’m installing it in reverse so it’ll hold the coolant hard line and the aftermarket oil feed line. I’m also swapping out the sway bar bushes and end links to try and get... Read more

So I recently found out that the rear door on my BA Falcon doesn’t lock, and I have absolutely no idea how long it’s been like that. Luckily, fixing the door lock actuator is not very difficult – and the replacement part will only cost you $4! Read more

If your XR6 Turbo doesn’t have an aftermarket oil feed line for the turbocharger, you need to get one of these NOW! The stock standard oil sender has a tiny filter which is prone to clogging, killing turbos prematurely. Installing an aftermarket turbo oil feed line like this one... Read more

Today we’re out in the Ford BA Falcon XR6 Turbo to have a listen to the new Venom turbo-back exhaust which I recently installed. The car wasn’t too happy (tune-wise) but the exhaust sounded great! Read more

Today we’re finishing off the drive belt install on my Ford BA Falcon XR6 Turbo. A worn out harmonic balancer was responsible for pulling the drive belt forward – by such an amount that it was rubbing on the belt tensioner. Luckily swapping out the harmonic balancer is easy…... Read more

Today we’re performing an engine oil and filter change on the BA Falcon XR6 Turbo! I was also planning on installing an aftermarket turbo oil feed line, but a lack of the correct size deep socket put an end to that. So stay tuned for next week! (hopefully) Read more

Today we’re replacing the drive belt, tensioner and idler pully on my BA Falcon XR6 Turbo. But as it turns out, there’s a bigger problem that stopped us in our tracks. Sometimes relatively simple jobs turn out to be something much bigger – tune in next week and we’ll... Read more

Join me as I install what is arguably one of the best value aftermarket exhaust systems for BA/BF XR6 Turbos – a Venom Turbo-Back Exhaust! Australian made, epic build quality, awesome 4″ dump pipe, 5″ cat convertor and a twin 2.5″ twin-muffler exhaust. You beauty! Venom also produce exhaust... Read more

In this episode I put on my safety thongs and finish up the intercooler installation on my Ford BA Falcon XR6 Turbo, plus I also make a few small tweaks to the front bar before reinstalling it. Silicon joiner options: 57mm Hump Hose: https://www.ebay.com.au/itm/122011162230 57mm 23° Elbow Hose: https://www.ebay.com.au/itm/261361495149... Read more

Looking for the largest return flow intercooler upgrade for your Ford BA/BF Falcon XR6 Turbo or FPV Typhoon/Tornado? PWR’s PWI-5405 return flow intercooler is exactly what you need. With an intercooler core that is twice as high as the original, it should provide an awesome amount of intake air... Read more